RX-7 Engine Rebuild Parts Page
The following is a list of parts, prices & pics.
Madza Speed Pressure Plate, Clutch Disk, Lighten Flywheel
Cover-MS# N311 16 410 (Rated at 730kgf/5280ftlbs),Cost $280.00
Disk-MS# 9F1021B, Cost $250.00
Flywheel-MS# (5.4kg/11.2lbs), Cost $100.00 used, $350.00new
Nissan Motorsports Fuel Pressure Regulator Part#22670-RR710, Cost $ 88.00.
TO4B Turbo Compressor, Cost Free, used with stock RX-7 turbine.Should be good for approx 350hp.
Compressor Inducer 1.904" & Major 2.750" & Inlet Size 2.750"
Turbonetics TO4B rebuild kit w/backplate, Cost $120.00.
High Pressure Fuel Line 6Ft 3/8"(6AN) Jegs Part # 799-3206($29.99)
Exhaust Thermo Wrap cost $35.00
Fuel Block Mr Gasket Jegs Part# 720-6151($11.69)
3/8" in and 1/4"out x3
using one 3/8" fitting Jegs Part#720-2965($3.99)
using two 1/4" to 6AN adp Jegs Part# 799-6044($9.38) for running Normal and Extra Injector Lines
using one 1/4"to1/8" adp Jegs Part# 799-6155($4.39) for Fuel Presure Sending Unit
K&N Hi-Flow (Washable)Fuel Filter Jegs Part# 599-81-0530($60.00)
using 6AN In & 6AN Out. 15.3gpm flow with a 10 micron filtering effciency
Hose End 6AN Jegs Part# 799-2026($5.69)
Straight 6AN Jegs Part# 799-1002($4.99)
Page 3 All the following Parts are (FD or 3rdGen) RX-7 Parts
Rotor Housing-Madza # 7K-A326($310.00each)
Seal Kit-Madza# N31810S60A($90.00set)
Corner Seal Plug-Madza# N326-11-C22A($16.00/set of 12)
Inner Rotor Seal-Madza# 0820-11-341($18.00/set of 4)
Outer Rotor Seal-Madza# 8341-11-343($33.00/set of 4)
Oil Pressure Regulator-Madza# N3A1-14-230($26.00)
Corner Seal Spring-Madza# NF01-11-C24($16.00/set of 12)
Apex Seal-Madza# N3F1-11-C00
Super Thermostat -65degrees C/149degrss F ($55.00)
HKS Sequential Blow Off ($250.00)
Rebic 4 with 720cc injectors ($850.00)
